COOLING FAN MOTOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the cooling fan motor LH or cooling fan motor RH removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not performed Link
Removal/installation of front bumper assembly Change grille shutter control modes and/or perform initialization* Grille shutter system

Click here

*: w/ Grille Shutter System

PROCEDURE


  1. REMOVE RADIATOR ASSEMBLY

    Click here

  2. REMOVE FAN RH


    1. A005NLH

      Remove the nut and fan RH.

  3. REMOVE FAN LH


    1. A005O1W

      Remove the nut and fan LH.

  4. REMOVE COOLING FAN MOTOR RH


    1. A005MTV

      Remove the 3 screws and cooling fan motor RH.

  5. REMOVE COOLING FAN MOTOR LH


    1. A005MNC

      Disengage the 3 clamps.

    2. A005MUO

      Remove the 3 screws and cooling fan motor LH.