FLOW SHUTTING VALVE INSTALLATION

PROCEDURE

1. INSTALL FLOW SHUTTING VALVE (WATER VALVE)

   
   

   1. Install a new gasket to the flow shutting valve (water valve).

   2. Install the flow shutting valve (water valve) with the 2 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Remove the water outlet from the vise.

   4. Install a new water outlet gasket to the cylinder head sub-assembly.

   5. Connect the No. 10 water by-pass hose and slide the clip to secure it.

   6. Install the water outlet with the flow shutting valve (water valve) with the 2 nuts.

      Torque:

      28 N*m  { 286 kgf*cm, 21 ft.*lbf }

   7. Connect the No. 9 water by-pass hose and slide the clip to secure it.

   8. Connect the No. 3 radiator hose and slide the clip to secure it.

   9. Engage the clamp to connect the wire harness to the water outlet.

   10. Connect the 3 connectors.

2. INSTALL INVERTER WITH CONVERTER ASSEMBLY

   Click here

3. ADD ENGINE COOLANT (for Engine)

   Click here

4. INSPECT FOR COOLANT LEAK (for Engine)

   Click here

5. INSTALL NO. 1 ENGINE UNDER COVER

   Click here