RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT IGCT RELAY (IGCT)


    1. A005NORC15
      *1 IGCT Relay (IGCT)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the IGCT relay (IGCT).