SUB RADIATOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during radiator assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Removal/installation of front bumper assembly Change grille shutter control modes and/or perform initialization* Grille shutter system

Click here


PROCEDURE


  1. REMOVE RADIATOR ASSEMBLY

    Tech Tips

    The radiator (for inverter coolant) is part of the radiator (for Engine). If the radiator (for inverter coolant) needs to be replaced, replace the radiator assembly.


    1. Remove the radiator assembly.

      Click here