FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A001S5AC46
      *A for LHD
      *B for RHD
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        for LHD
        Tester Connection Condition Specified Condition
        M73-3 (+) - M73-2 (E) Driver side seat belt unfastened Below 1 Ω
        Driver side seat belt fastened 10 kΩ or higher
        for RHD
        Tester Connection Condition Specified Condition
        M61-3 (+) - M61-2 (E) Driver side seat belt unfastened Below 1 Ω
        Driver side seat belt fastened 10 kΩ or higher

        If the result is not as specified, replace the front seat inner belt assembly.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. Check the resistance.


      1. A001OHHC05
        *A for LHD
        *B for RHD
        *a

        Component without harness connected

        (Front Seat Inner Belt Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        for LHD
        Tester Connection Condition Specified Condition
        M53-2 (E) - B-3 Front passenger side seat belt unfastened Below 1 Ω
        Front passenger side seat belt fastened 10 kΩ or higher
        M53-3 (+) - B-1 Always Below 1 Ω
        for RHD
        Tester Connection Condition Specified Condition
        M51-2 (E) - B-3 Front passenger side seat belt unfastened Below 1 Ω
        Front passenger side seat belt fastened 10 kΩ or higher
        M51-3 (+) - B-1 Always Below 1 Ω

        If the result is not as specified, replace the front seat inner belt assembly.