REAR WIPER RUBBER INSTALLATION

Info Added 2017-10-06

PROCEDURE


  1. INSTALL REAR WIPER RUBBER


    1. A001P22C02
      B0048R7 Install in this Direction

      Install the 2 rear wiper rubber backing plates to the rear wiper rubber.

      Note

      Install the backing plates facing the correct direction.

    2. Insert the rear wiper rubber with the 2 rear wiper rubber backing plates through the second claw from the front of the rear wiper blade and then push it through each claw until the rear claw.

      A001QKYC02
      *a Second Claw *b Stopper
      B0048R7 Install in this Direction (1) B0048O3 Install in this Direction (2)
      A001S9A Install in this Direction (3) - -

    3. After pushing the rear wiper rubber through the rear claw, pull it slightly over the rear stopper.

    4. Slide the rear wiper rubber through the front claw.

    5. A001O3FC01
      *a Correct
      *b Incorrect

      Securely engage the rear wiper blade claw to the rear wiper rubber groove as shown in the illustration.

      Tech Tips


      • If the front claw of the rear wiper blade is not in the rear wiper rubber groove, grasp the rear wiper rubber and slide it up and down multiple times to insert the claw into the groove.

      • Applying a small amount of window washer fluid to the rear wiper rubber can make it easier to insert the claw into the groove.

  2. INSTALL REAR WIPER BLADE


    1. A001Q54C01
      B0048R7 Install in this Direction

      Push the rear wiper blade as shown in the illustration to install it to the rear wiper arm.

    2. A001RLB

      Engage the claw to install the rear wiper blade as shown in the illustration.

      Note

      Be careful not to damage the claw.

    3. A001R57

      Lower the rear wiper arm and blade assembly as shown in the illustration.