2ZR-FXE SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   Tech Tips

   Perform "Inspection After Repair" after replacing a spark plug.

   Click here

   
   

   1. Install the 4 spark plugs to the cylinder head sub-assembly.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

2. INSTALL IGNITION COIL ASSEMBLY

   Click here

3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL COWL BODY MOUNTING REINFORCEMENT RH

   Click here

6. INSTALL COWL BODY MOUNTING REINFORCEMENT LH

   Click here

7. INSTALL WATER GUARD PLATE LH

   Click here

8. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

9. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

10. PERFORM INITIALIZATION

    
    

    1. Perform "Inspection After Repair" after replacing an ignition coil assembly and spark plug.

       Click here