KNOCK SENSOR INSTALLATION

PROCEDURE

1. INSTALL KNOCK SENSOR

   Tech Tips

   Perform "Inspection After Repair" after replacing a knock sensor.

   Click here

   
   
   1. 

      *a	Front of Engine
      *b	10°

      Install the knock sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that the knock sensor is in the correct position.

   2. Connect the knock sensor connector.

2. INSTALL INTAKE MANIFOLD

   Click here

3. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing a knock sensor.

      Click here