IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   Click here

2. INSTALL IGNITION COIL ASSEMBLY

   Tech Tips

   Perform "Inspection After Repair" after replacing an ignition coil assembly.

   Click here

   
   

   1. Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

   2. Connect the 4 ignition coil assembly connectors.

3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL COWL BODY MOUNTING REINFORCEMENT LH

   Click here

6. INSTALL COWL BODY MOUNTING REINFORCEMENT RH

   Click here

7. INSTALL WATER GUARD PLATE LH

   Click here

8. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

9. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

10. PERFORM INITIALIZATION

    
    

    1. Perform "Inspection After Repair" after replacing an ignition coil assembly and spark plug.

       Click here