PRE-CRASH SAFETY SYSTEM FREEZE FRAME DATA


  1. DESCRIPTION


    1. Whenever PCS DTC is detected, the driving support ECU assembly stores the current vehicle (ECU or sensor) state as Freeze Frame Data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Pre-Crash 2 / Trouble Codes.

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.

      Pre-Crash 2
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Turn Light RH

      Turn signal switch (right) status/

      ON or OFF

      ON: Turn signal switch (right) on

      OFF: Turn signal switch (right) off

      		 -
      Turn Light LH

      Turn signal switch (left) status/

      ON or OFF

      ON: Turn signal switch (left) on

      OFF: Turn signal switch (left) off

      		 -
      PCS Indicator

      "Pre-crash Safety Malfunction Visit Your Dealer" display request signal/

      ON or OFF

      ON: "Pre-crash Safety Malfunction Visit Your Dealer" display requested

      OFF: "Pre-crash Safety Malfunction Visit Your Dealer" display not requested

      		 -
      PCS Disabled Indicator

      "Pre-crash Safety Unavailable " display request signal/

      ON or OFF

      ON: "Pre-crash Safety Unavailable" display requested

      OFF: "Pre-crash Safety Unavailable" display not requested

      		 -
      Pre-Crash Safety Warning Buz

      Pre-crash safety system warning buzzer/

      Valid or Inval

      Valid: Pre-crash warning buzzer operation possible

      Inval: Pre-crash warning buzzer operation not possible

      		 -
      Pre-Crash Brake

      Pre-crash brake function/

      Valid or Inval

      Valid: Pre-crash brake operation possible

      Inval: Pre-crash brake operation not possible

      		 -
      Warning Brake

      Warning brake activation signal/

      ON or OFF

      ON: Warning brake activated

      OFF: Warning brake not activated

      		 -
      Brake Assist Standby

      Supplemental brake pressure signal/

      ON or OFF

      ON: Supplemental brake pressure being provided

      OFF: Supplemental brake pressure not being provided

      		 Signal status changes when supplemental brake pressure is being provided after a crash is judged as unavoidable and before the brake pedal is depressed
      Pre-Crash Brake Control

      Pre-crash brake operational status/

      ON or OFF

      ON: Pre-crash brake operating

      OFF: Pre-crash brake not operating

      		 Status changes when pre-crash brake operates before a crash
      AVS Start

      AVS control activation status/

      ON or OFF

      ON: AVS control activated

      OFF: AVS control not activated

      		 Not Supported
      VGRS Start

      VGRS control activation status/

      ON or OFF

      ON: VGRS control activated

      OFF: VGRS control not activated

      		 Not Supported
      The Number of DTCs Number of past trouble codes/min: 0, max: 255 Number of DTCs will be displayed -