FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    Click here

  3. INSTALL SEATBACK CLIMATE CONTROL COVER (w/ Climate Control Seat System)

    Click here

  4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY

    Click here

  5. CONNECT FRONT SEAT AIRBAG ASSEMBLY


    1. w/o Seat Heater System:


      1. Engage the 2 clamps.

    2. w/ Seat Heater System:


      1. Engage the 3 clamps.

      2. Connect the connector.

  6. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  7. INSTALL FRONT POWER ADJUSTER SHIELD

    Click here

  8. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD

    Click here

  9. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  10. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY

    Click here

  11. INSTALL POWER SEAT SWITCH ASSEMBLY (for Front Passenger Side with Power Seat Switch Assembly)

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY

    Click here

  13. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here