AIRBAG SYSTEM SYSTEM DESCRIPTION


  1. GENERAL


    1. Deceleration sensors used for the airbag system are installed to various parts on the vehicle and calculate the deceleration rate of each part during a collision.

    2. Depending on the situation, the airbag sensor assembly sends a deployment signal to each airbag and pretensioner based on the information from each sensor.

  2. DEPLOYMENT CONDITION


    1. FRONTAL COLLISION

      A01W5Q3E04

      1. Frontal collision signals are produced based on the information from the airbag sensor assembly and front airbag sensors.

        Tech Tips

        In the case of a frontal collision, the SRS ignition signal may be output after receiving an ON signal from the deceleration sensor built into the airbag sensor assembly even without a signal from the front airbag sensors.

      2. Frontal collision signals are used to deploy the SRS parts in the diagram.

    2. SIDE COLLISION (Pattern 1)

      A01W3V2E03

      1. Side collision (Pattern 1) signals are produced based on the information from the airbag sensor assembly and side airbag sensor assembly.

      2. Side collision (Pattern 1) signals are used to deploy the SRS parts in the diagram.

    3. SIDE COLLISION (Pattern 2)

      A01W3FOE21

      1. Side collision (Pattern 2) signals are produced based on the information from the airbag sensor assembly and rear airbag sensor.

      2. Side collision (Pattern 2) signals are used to deploy the SRS parts in the diagram.