CLOCK REMOVAL

PROCEDURE


  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)


    1. Disable the auto away/return function by changing the customize parameter Click here.

      Note

      Record the current customize parameter setting (whether the auto away/return function is enabled or disabled) in order to restore the current setting after finishing this operation.

      Tech Tips

      Performing the above operation disables the auto away/return function when the engine switch is turned off.

    2. Turn the engine switch on (IG). Operate the tilt and telescopic switch to fully extend and lower the steering column assembly.

    3. Turn the engine switch off.

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE CLOCK ASSEMBLY


    1. A01W598

      Disengage the 4 claws and remove the clock assembly.