METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE METER / GAUGE SYSTEM

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

         Note

         
         

         • Be sure to record the current value before customizing.

         Warning

         Tester Display	Default	Content	Setting	Relevant ECU
         Flasher Sound Volume Adjustment	Medium	Function to change the flasher sound volume	Medium, Small, Large	Combination meter assembly
         Lane Change Flashing Times Setting	3	Function to change the lane change flashing times	OFF, 3, 4, 5, 6, 7	Combination meter assembly

         Display

         Tester Display	Default	Content	Setting	Relevant ECU
         ODO Display Time After IG OFF Setting	30s	Function to change the ODO display time after engine switch is turned off	30s, 60s, 600s, OFF	Combination meter assembly