DOOR CONTROL RECEIVER(for Rear) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   
   

   1. Connect the connector to the door control receiver.

   2. Engage the 2 guides into the holes and install the door control receiver with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

   Click here

3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

   Click here

4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

   Click here

5. INSTALL REAR SEAT SHOULDER BELT HOLE COVER

   Click here

6. INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)

   Click here

7. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

8. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

   Click here

9. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Click here

10. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

11. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    Click here

12. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

    Click here

13. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

14. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

15. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

16. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

17. INSTALL REAR SEAT ASSEMBLY

    Click here