ULTRASONIC SENSOR(for Rear Side) REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 2 ULTRASONIC SENSOR WITH CLIP

    Tech Tips

    Use the same procedure for all No. 2 ultrasonic sensor with clips.


    1. A01VZ83

      Disconnect the connector.

      Tech Tips

      The illustration is for the corner LH side. The orientation for the other sensors is the opposite of the corner LH side.

    2. Disengage the clamp.

    3. A01VZFS

      Disengage the 2 claws to remove the No. 2 ultrasonic sensor with clip.

      Tech Tips

      The illustration is for the corner LH side. The orientation for the other sensors is the opposite of the corner LH side.

  3. REMOVE NO. 2 ULTRASONIC SENSOR CLIP

    Tech Tips

    Use the same procedure for all No. 2 ultrasonic sensor clips.


    1. A01W54WE04
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw to remove the No. 2 ultrasonic sensor clip.

      Tech Tips

      The illustration is for the corner LH side. The orientation for the other clips is the opposite of the corner LH side.

  4. REMOVE NO. 2 ULTRASONIC SENSOR

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Use the same procedure for all No. 2 ultrasonic sensor retainers.

    • Perform this step only when necessary.


    1. A01W40T

      Remove the No. 2 ultrasonic sensor retainer.

      Tech Tips

      The illustration is for the corner LH side. The orientation for the other retainers is the opposite of the corner LH side.

    2. Remove any remaining double-sided tape from the rear bumper assembly.