NAVIGATION SYSTEM Disc cannot be Inserted or is Ejected Right After Insertion

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click here

PROCEDURE


  1. CHECK IF A PROPER DISC IS INSERTED


    1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      Disc is normal.

      Tech Tips


      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs and DVDs with adhesive paper labels should not be played.

      • Commercial audio CDs and DVDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs and DVDs, refer to Owner's Manual.

      Result
      Proceed to
      OK
      NG

    NG

    END (DISC IS FAULTY)

    OK

  2. CHECK THAT DISC IS INSERTED PROPERLY


    1. Check whether or not the disc is inserted upside down.

      OK
      Disc is properly inserted.
      Result
      Proceed to
      OK
      NG

    NG

    INSERT DISC PROPERLY

    OK

  3. CLEAN DISC AND RECHECK


    1. A01W4SE

      Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

      OK
      Malfunction disappears.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Result
      Proceed to
      OK
      NG

    OK

    END (DISC WAS DIRTY)

    NG

  4. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.
      Result
      Proceed to
      OK
      NG

    OK

    END (DISC WAS FAULTY)

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here