REAR PACKAGE TRAY SPEAKER INSPECTION

PROCEDURE


  1. INSPECT STEREO COMPONENT SPEAKER ASSEMBLY


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A01W54XE02
      Text in Illustration
      *a

      Component without harness connected

      (Stereo Component Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      for 8 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 2.0 to 3.0 Ω
      for 15 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 5.0 to 7.0 Ω

      If the result is not as specified, replace the speaker.

  2. INSPECT REAR HEADER SPEAKER ASSEMBLY (for 15 Speakers)


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A01W4DNE04
      Text in Illustration
      *a

      Component without harness connected

      (Rear Header Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 7.0 to 10.6 Ω

      If the result is not as specified, replace the speaker.