STEERING WHEEL INSTALLATION

CAUTION / NOTICE / HINT

Note


  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the battery connected and the engine switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.

PROCEDURE


  1. INSTALL STEERING PAD SWITCH ASSEMBLY

    Click here

  2. INSTALL CRUISE CONTROL MAIN SWITCH

    Click here

  3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  4. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  5. INSTALL STEERING WHEEL ASSEMBLY


    1. A01W1CPE01
      Text in Illustration
      *a Matchmark

      Install the steering wheel assembly aligning the matchmarks on the steering wheel assembly and steering main shaft.

    2. Install the steering wheel assembly set nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    3. w/ Heated Steering Wheel System or Pre-crash Safety System:


      1. Connect the connector.

    4. Connect each connector to the spiral cable sub-assembly.

  6. CHECK STEERING WHEEL CENTER POINT

  7. INSTALL HORN BUTTON ASSEMBLY

    Click here