TILT AND TELESCOPIC MANUAL SWITCH REMOVAL

PROCEDURE


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  4. REMOVE LOWER STEERING COLUMN COVER

    Click here

  5. REMOVE TILT AND TELESCOPIC SWITCH


    1. B001NPDE01
      Text in Illustration
      *a Slider

      Slide the slider to release the lock, and then disconnect the yellow airbag connector from the spiral cable with sensor sub-assembly.

      Note

      When disconnecting any airbag connector, take care not to damage the airbag wire harness.

    2. A01W1I5

      Disconnect the tilt and telescopic switch connector.

    3. Disengage the claw and pull out the tilt and telescopic switch.

      Note

      Pushing on the claw too hard will break the claw.