PARKING BRAKE SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A01W4XFE06
      Text in Illustration
      *1 Terminal
      *2 Nut
      *a ON
      *b OFF

      Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      Standard Resistance
      Tester Connection Condition Specified Condition
      Terminal - Nut On (When shaft is not pressed) Below 1 Ω
      Terminal - Nut Off (When shaft is pressed) 10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.