PARKING BRAKE PEDAL(for RHD) REMOVAL

PROCEDURE


  1. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

  2. REMOVE FRONT WHEEL RH

  3. REMOVE SHIFT LEVER SUPPORT

    Tech Tips

    Use the same procedure as for LHD.


  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  5. REMOVE FLOOR CARPET BRACKET LH

    Click here

  6. REMOVE AIRBAG SENSOR ASSEMBLY

    Click here

  7. REMOVE COMBINATION METER ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD Click here.

  8. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

  9. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD Click here.

  10. REMOVE STEERING INTERMEDIATE SHAFT ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD Click here.

  11. LOOSEN ADJUSTING NUT


    1. A01W3Y4E02
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Remove the lock nut and loosen the adjusting nut.

  12. SEPARATE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A01W0PQE04
      Text in Illustration
      *a Turn
      *b Hold

      Separate the No. 4 parking brake cable assembly from the parking brake control pedal assembly as shown in the illustration.

  13. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY


    1. A01W04N

      Remove the clip from the No. 1 parking brake cable assembly.

    2. Remove the bolt and separate the No. 1 parking brake cable assembly.

    3. A01VZEP

      Disconnect the parking brake switch connector.

    4. A01W5BD

      Remove the bolt, 2 nuts and parking brake control pedal assembly.