BRAKE PEDAL(for RHD) REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Tech Tips

    Use the same procedure as for LHD Click here.

  2. REMOVE HEADLIGHT LEVELING ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)

    Click here

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE PUSH ROD PIN


    1. A01VZ4B

      Remove the clip and push rod pin.

  6. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01W1TL

      Remove the brake pedal return spring from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01W4XD

      Disconnect the connector.

    2. A01W5IE

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01W122

      Remove the 4 nuts and brake pedal support assembly.