BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Click here

  2. REMOVE HEADLIGHT LEVELING ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)

    Click here

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  5. REMOVE PUSH ROD PIN


    1. A01W0B2

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  6. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01W0KM

      Remove the brake pedal return spring from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01W41T

      Disconnect the brake pedal load sensing switch connector and disengage the clamp.

    2. A01W2P7

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01W5A7

      Remove the 4 nuts and brake pedal support assembly.