BRAKE MASTER CYLINDER(for RHD) REASSEMBLY

PROCEDURE

1. INSTALL MASTER CYLINDER RESERVOIR GROMMET

   
   

   1. Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

   2. Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.

2. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

   
   

   1. Install the brake master cylinder reservoir assembly to the brake master cylinder assembly.

3. INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN

   
   

   1. Secure the brake master cylinder sub-assembly in a vise.

      Note

      
      

      • Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

      • Do not drop the brake master cylinder reservoir assembly.

   2. 

      Using a pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir assembly.

4. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

5. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY