REAR STABILIZER BAR REMOVAL

PROCEDURE


  1. REMOVE REAR WHEELS

  2. REMOVE NO. 2 FLOOR UNDER COVER


    1. A01W3N1

      Remove the 2 bolts, screw and 2 clips.

      Text in Illustration
      B001O8N Bolt
      B001OAO Screw
      B001NW5 Nut (attached to under cover)

    2. Disengage the 3 nuts and remove the No. 2 floor under cover.

  3. REMOVE NO. 1 FLOOR UNDER COVER


    1. A01W5NR

      Remove the 2 bolts and screw.

      Text in Illustration
      B001O8N Bolt
      B001OAO Screw
      B001NW5 Nut (attached to under cover)

    2. Disengage the 3 nuts and 2 clips, and remove the No. 1 floor under cover.

  4. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    1. A01W061

      Remove the nut and separate the rear stabilizer link assembly LH from the rear shock absorber with coil spring.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

    2. A01W3Z9

      Remove the nut and rear stabilizer link assembly LH from the rear stabilizer bar.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

  5. REMOVE REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  6. REMOVE REAR STABILIZER BAR


    1. A01W3P8

      Remove the 4 nuts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets, 2 rear No. 2 stabilizer bar brackets and 2 rear stabilizer bushings from the rear suspension member sub-assembly.

  7. REMOVE REAR NO. 2 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 2 stabilizer bar brackets from the rear stabilizer bar.

  8. REMOVE REAR NO. 1 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 1 stabilizer bar brackets from the rear stabilizer bar.

  9. REMOVE REAR STABILIZER BUSHING


    1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.