FRONT STABILIZER BAR INSTALLATION

PROCEDURE

1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING

   
   
   1. 

      Text in Illustration

      *a	Cutout
      	Front of the Vehicle
      	Inside of the Vehicle

      Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

      Note

      When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.

2. INSTALL FRONT STABILIZER BAR

   
   

   1. Install the front stabilizer bar to the front frame assembly.

3. INSTALL FRONT NO. 1 STABILIZER BRACKET LH

   
   

   1. Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.

      Torque:

      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

4. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

   Tech Tips

   Perform the same procedure as the LH side.

5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

   
   

   1. Install the front stabilizer link assembly LH to the front stabilizer bar with the nut.

      Torque:

      74 N*m  { 755 kgf*cm, 55 ft.*lbf }

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.

6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

   Tech Tips

   Perform the same procedure as the LH side.

7. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

   for 2AR-FE: Click here

   for 2GR-FE: Click here

   for 6AR-FSE: Click here