FRONT LOWER BALL JOINT ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY


    1. Check for looseness.


      1. Lift up the vehicle.

      2. A01W2Y7

        Move the front lower No. 1 suspension arm sub-assembly up and down by hand (294 N {30 kgf} or more) to check that there is no looseness at the front lower ball joint assembly.