STEERING KNUCKLE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY

    Click here

  2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. REMOVE FRONT NO. 1 WHEEL BEARING DUST DEFLECTOR

    Click here

  4. REMOVE FRONT AXLE HUB HOLE SNAP RING

    Click here

  5. REMOVE FRONT AXLE HUB SUB-ASSEMBLY

    Click here

  6. REMOVE FRONT DISC BRAKE DUST COVER

    Click here

  7. REMOVE STEERING KNUCKLE


    1. A01W0A1E04
      Text in Illustration
      *1 Steel Plate
      *2 V-block

      Place the bearing inner race (outside) on the front axle hub bearing.

    2. Using SST, a steel plate, V-blocks and a press, remove the front axle hub bearing from the steering knuckle.

      SST
      09950-60010   ( 09951-00440, 09952-06010 )
      09950-60020   ( 09951-00750 )
      09950-70010   ( 09951-07100 )

      Note

      Keep the steering knuckle level.