DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE


  1. DRAIN AUTOMATIC TRANSAXLE FLUID


    1. Remove the front wheel opening extension pad LH, engine under cover LH and front fender apron seal LH.

    2. A01W267

      Remove the refill plug and gasket from the automatic transaxle assembly.

    3. A01W3I3E05
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Overflow Plug
      *3 Hexagon Socket Wrench

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle assembly.

    4. A01W14GE08
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *a Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle assembly.

    5. Drain automatic transaxle fluid from the automatic transaxle assembly.

    6. A01W14GE08
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *a Overflow Plug Hole

      Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the automatic transaxle assembly.

      Torque:
      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }
    7. A01W3I3E05
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Overflow Plug
      *3 Hexagon Socket Wrench

      Using a 6 mm hexagon socket wrench, install a new gasket and the overflow plug to the automatic transaxle assembly.

      Torque:
      40 N*m  { 408 kgf*cm, 29 ft.*lbf }
    8. A01W267

      Install a new gasket and the refill plug to the automatic transaxle assembly.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  2. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  3. REMOVE TRANSAXLE CASE OIL SEAL


    1. A01W269E05

      Using SST, tap out the transaxle case oil seal from the automatic transaxle assembly.

      SST
      09308-00010

  4. REMOVE DRIVE SHAFT BEARING BRACKET

    Click here

  5. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    1. A01VZCJE04

      Using SST, tap out the front transaxle case oil seal from the automatic transaxle assembly.

      SST
      09308-00010

  6. INSTALL FRONT TRANSAXLE CASE OIL SEAL


    1. A01W25EE06

      Using SST and a hammer, tap in a new front transaxle case oil seal to the automatic transaxle assembly.

      SST
      09316-60011   ( 09316-00011 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the front transaxle case oil seal is installed in the correct direction.

    2. Coat the lip of the front transaxle case oil seal with MP grease.

  7. INSTALL DRIVE SHAFT BEARING BRACKET

    Click here

  8. INSTALL TRANSAXLE CASE OIL SEAL


    1. A01W3MKE06

      Using SST and a hammer, tap in a new transaxle case oil seal to the automatic transaxle assembly.

      SST
      09316-10010
      09950-70010   ( 09951-07150 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Check that the transaxle case oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  9. INSTALL FRONT DRIVE SHAFT HOLE SNAP RING LH

    Click here

  10. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here

  11. ADD AUTOMATIC TRANSAXLE FLUID

    Click here