TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  7. REMOVE AIRBAG SENSOR ASSEMBLY

    Click here

  8. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Click here

  9. DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. Turn back the floor carpet.

    2. A01W58P

      Remove the bolt and nut, and disconnect the No. 1 parking brake cable assembly from the body.

  10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A01W4GG

      Disconnect the transmission control cable assembly from the lower shift lever assembly.

    3. Disengage the 2 claws to disconnect the transmission control cable assembly from the lower shift lever assembly.

    4. A01W0X4

      Disconnect the wire harness clamp from the wire harness clamp bracket.

    5. A01W534

      Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever.

    6. Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.

    7. A01W4Z5

      Turn back the dash panel insulator.

    8. Remove the 2 bolts and pull out the transmission control cable assembly from the body.