TCM REMOVAL

CAUTION / NOTICE / HINT

Note

If automatic transaxle parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary Click here.

PROCEDURE


  1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. REMOVE INLET NO. 2 AIR CLEANER

    Click here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  7. REMOVE BATTERY

    Click here

  8. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  9. REMOVE TCM


    1. A01W4A4

      Turn the lock lever and disconnect the connector from the TCM.

    2. B001OGY

      Remove the 2 bolts and TCM from the automatic transaxle assembly.