SHIFT LEVER INSTALLATION

PROCEDURE


  1. INSTALL SHIFT LEVER SUPPORT


    1. A01W1HPE05

      Install the shift lever support to the vehicle body with the 4 bolts in the order shown in the illustration.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL LOWER SHIFT LEVER ASSEMBLY

    Note

    Check that the park/neutral position switch assembly and shift lever are in neutral.


    1. A01W3M1E03

      Install the lower shift lever assembly to the shift lever support with the 4 bolts in the order shown in the illustration.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect the transmission control switch connector.

    3. Connect the shift lock control ECU connector.

    4. Engage the 5 clamps.

    5. A01W24SE12
      Text in Illustration
      *a Slider
      *b Lock Piece
      *c Slide
      *d Pull

      Slide the slider of the transmission control cable assembly in the direction indicated by the arrow and pull the lock piece outward.

    6. Engage the 2 claws to connect the transmission control cable assembly to the lower shift lever assembly.

    7. A01W1G4E01
      Text in Illustration
      *a Lock Piece

      Connect the transmission control cable assembly to the lower shift lever assembly.

      Note


      • Check that the lock piece is pulled out.

      • Connect the transmission control cable assembly all the way to the base of the lower shift lever assembly pin.

    8. Push the lock piece into the adjuster case.

      Note


      • Check that the park/neutral position switch assembly and the shift lever are in neutral.

      • Securely push in the lock piece until the slider lock is engaged.

  3. INSTALL NO. 1 CONSOLE BOX DUCT

    Click here

  4. INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET


    1. Install the No. 1 console box mounting bracket to the lower shift lever assembly with the screw.

  5. INSTALL FLOOR CARPET BRACKET LH

    Click here

  6. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here

  7. INSPECT SHIFT LEVER POSITION

    Click here

  8. INSTALL SHIFT LEVER CAP


    1. A01W45GE01
      Text in Illustration
      *a Groove

      Engage the 2 claws to install the shift lever cap to the shift position indicator.

      Note

      Install the shift lever cap with its groove facing the left of the vehicle.