ATF TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT ATF TEMPERATURE SENSOR ASSEMBLY


    1. A01W1N6E14

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      THO1 - E2 10°C (50°F) 5 to 8 kΩ
      THO1 - E2 25°C (77°F) 2.5 to 4.5 kΩ
      THO1 - E2 110°C (230°F) 0.22 to 0.28 kΩ
      THO1 - Body ground Always 10 kΩ or higher

      If the resistance is out of the specified range with the ATF temperature shown in the preceding table, replace the ATF temperature sensor assembly. Otherwise, the driveability of the vehicle may decrease.