VACUUM SENSOR ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL VACUUM SENSOR GROMMET

   
   

   1. Install a new vacuum sensor grommet to the brake booster assembly.

2. INSTALL VACUUM SENSOR ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a

      30°

      Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.

   2. Connect the vacuum sensor assembly connector.

   3. Install the wire harness bracket to the brake master cylinder sub-assembly with the nut.

      Torque:

      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

   4. Engage the 2 clamps.

3. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

   Click here

4. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here