STARTER DISASSEMBLY

PROCEDURE

1. REMOVE REPAIR SERVICE STARTER KIT

   
   

   1. 

      Remove the nut and disconnect the lead wire from the magnet switch.

   2. 

      Holding the magnet switch to the starter drive housing assembly, remove the 2 screws.

   3. Remove the magnet switch.

   4. Remove the return spring and plunger from the starter drive housing assembly.

2. REMOVE STARTER YOKE ASSEMBLY

   
   

   1. 

      Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.

   2. 

      Remove the starter yoke assembly from the starter commutator end frame assembly.

3. REMOVE STARTER ARMATURE PLATE

   
   

   1. 

      Remove the starter armature plate from the starter yoke assembly.

4. REMOVE STARTER COMMUTATOR END FRAME COVER

   
   

   1. 

      Using a screwdriver, pry out the starter commutator end frame cover.

5. REMOVE STARTER ARMATURE ASSEMBLY

   
   
   1. 

      Text in Illustration

      *1	Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and washer.

      Note

      Do not drop the starter armature assembly.

   2. Remove the starter armature assembly from the starter commutator end frame assembly.

6. REMOVE PLANETARY GEAR

   
   

   1. 

      Remove the 3 planetary gears from the starter drive housing assembly.