OIL LEVEL SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL LEVEL SENSOR

   
   

   1. Install a new gasket to the engine oil level sensor.

   2. Install the engine oil level sensor with the 4 bolts.

      Torque:

      8.2 N*m  { 84 kgf*cm, 73 in.*lbf }

   3. Connect the engine oil level sensor connector.

   4. Connect the engine oil pressure switch connector. (w/ Oil Cooler)

   5. Connect the wire harness protector. (w/ Oil Cooler)

2. ADD ENGINE OIL

   Click here

3. INSPECT FOR ENGINE OIL LEAK

4. INSPECT ENGINE OIL LEVEL

   Click here

5. INSTALL FRONT FENDER APRON SEAL RH

6. INSTALL ENGINE UNDER COVER RH

7. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

8. INSTALL FRONT WHEEL RH

   Torque:

   103 N*m  { 1049 kgf*cm, 76 ft.*lbf }