OIL PRESSURE SWITCH REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH (w/ Oil Cooler)

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/o Oil Cooler)


    1. Disconnect the engine oil pressure switch connector.

    2. A01W2IG

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.

  6. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/ Oil Cooler)


    1. A01W1B0

      Disconnect the wire harness protector.

    2. Disconnect the engine oil pressure switch connector.

    3. A01W11Q

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.