ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Clean the installation surfaces of the oil cooler assembly.

   2. Apply a small amount of engine oil to 3 new gaskets.

   3. Install the 3 gaskets to the oil cooler assembly.

   4. Temporarily install the oil cooler assembly with the oil cooler union bolt, nut and a new seal washer.

   5. 

      Using several steps, uniformly install and tighten the oil cooler union bolt and nut in the order shown in the illustration.

      Torque:

      Oil Cooler Union Bolt

      60 N*m  { 612 kgf*cm, 44 ft.*lbf }

      Nut

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

   Click here

3. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

   Click here

4. ADD ENGINE COOLANT

   Click here

5. ADD ENGINE OIL

   Click here

6. INSPECT FOR COOLANT LEAK

   Click here

7. INSPECT FOR OIL LEAK

   Click here