OIL PUMP REMOVAL

CAUTION / NOTICE / HINT

Note

Do not remove the oil pump or oil pump relief valve from the timing chain cover sub-assembly.

PROCEDURE


  1. INSTALL ENGINE STAND

    Click here

  2. REMOVE IGNITION COIL ASSEMBLY

    Click here

  3. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

    Click here

  4. REMOVE CRANKSHAFT POSITION SENSOR

    Click here

  5. REMOVE CRANKSHAFT PULLEY

    Click here

  6. REMOVE ENGINE MOUNTING BRACKET RH


    1. A01W4VQ

      Remove the 5 bolts and engine mounting bracket RH.

  7. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

    Click here

  8. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY


    1. A01W478

      Remove the 17 bolts and 2 nuts.

    2. Remove the timing chain cover sub-assembly by prying between the timing chain cover sub-assembly and cylinder head sub-assembly, camshaft housing sub-assembly, cylinder block and stiffening crankcase assembly with a screwdriver as shown in the illustration.

      A01W0MQ

      Note

      Be careful not to damage the contact surfaces of the cylinder head sub-assembly, camshaft housing sub-assembly, cylinder block, stiffening crankcase assembly or timing chain cover sub-assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01W266

      Remove the 2 oil pump gaskets and oil hole cover gasket from the stiffening crankcase assembly.

  9. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A01W1FOE04
      Text in Illustration
      *1 Wooden Block

      Using a screwdriver and wooden block, pry out the timing chain cover oil seal.

      Note

      Do not damage the surface of the timing chain cover oil seal press fit hole.

      Tech Tips

      Tape the screwdriver tip before use.