THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. A01W4TIE03
      Text in Illustration
      *1 Jiggle Valve
      *a 10°

      Install the thermostat with the jiggle valve facing up.

      Tech Tips

      The jiggle valve may be set within 10° on either side of the prescribed position.

  2. INSTALL WATER INLET


    1. Install the water inlet with the 2 nuts .

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. CONNECT NO. 2 RADIATOR HOSE

    Click here

  4. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

    Click here

  5. INSTALL V-RIBBED BELT

    Click here

  6. ADD ENGINE COOLANT

    Click here

  7. INSPECT FOR COOLANT LEAK

    Click here