ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Clean the oil cooler assembly contact surface on the cooler mounting.

   2. Install a new O-ring to the oil cooler assembly.

   3. Install the oil cooler assembly with the oil cooler union bolt.

      Torque:

      68 N*m  { 693 kgf*cm, 50 ft.*lbf }

   4. Install the No. 4 water by-pass hose and No. 5 water by-pass hose with the bolt, 2 clamps and 4 clips.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL EXHAUST MANIFOLD ASSEMBLY LH

   Click here

3. ADD ENGINE COOLANT

   Click here

4. ADD ENGINE OIL

   Click here

5. INSPECT FOR COOLANT LEAK

   Click here

6. INSPECT FOR OIL LEAK

7. INSPECT ENGINE OIL LEVEL

   Click here