EXHAUST MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  2. REMOVE ENGINE UNDER COVER RH (w/ Front Lower Bumper Absorber)

  3. REMOVE ENGINE UNDER COVER RH (w/o Front Lower Bumper Absorber)

  4. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  5. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)

    Click here

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01W0GW

      Disconnect the 2 wire harnesses from the clamp.

    2. Disconnect the 2 heated oxygen sensor connectors.

    3. A01W2C6

      Remove the 2 bolts and No. 1 exhaust pipe support bracket (for Rear Side).

    4. A01W1S8

      Remove the 4 bolts, 4 nuts and front exhaust pipe assembly.

    5. Remove the 3 gaskets from the front exhaust pipe assembly.

  7. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)

    Click here

  8. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A01W1OM

      Using a 12 mm deep socket wrench, remove the 6 nuts and exhaust manifold sub-assembly RH.

    2. A01VZZO

      Remove the gasket from the cylinder head sub-assembly.

  9. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)

    Click here

  10. REMOVE NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  11. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01W013

      Remove the 3 bolts and No. 2 exhaust manifold heat insulator.

  12. REMOVE NO. 2 MANIFOLD STAY


    1. A01W4WS

      Remove the bolt, nut and No. 2 manifold stay.

  13. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01VZBZ

      Using a 12 mm deep socket wrench, remove the 6 nuts and exhaust manifold sub-assembly LH.

    2. A01W15S

      Remove the gasket from the cylinder head sub-assembly.