INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) REMOVAL

PROCEDURE


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR


    1. A01W3S4

      Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

      Note


      • A01W5M9

        Make sure that foreign matter, such as water, oil, sand or iron particles, does not enter the gear chamber or intake air control valve actuator at the locations marked by the circles in the illustration.

      • A01W1NT

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.