CANISTER REMOVAL

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY

    Click here

  3. REMOVE FUEL PUMP WITH FILTER ASSEMBLY


    1. A01VZA2

      Disconnect the connector of the fuel pump harness.

    2. A01W3ZD

      Disconnect the fuel pump filter hose.

    3. A01W2PXE01
      Text in Illustration
      *1 Tube
      *2 Fuel Sub-tank

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and fuel pump with filter assembly from the fuel sub-tank.

      Note

      Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube Click here.

    4. A01W03H

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.

    5. A01W4ZAE04
      Text in Illustration
      *1 Fuel Filter
      *2 Suction Filter

      Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump with filter assembly from the fuel filter.

      Note


      • Do not damage the fuel filter.

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump with filter assembly.

    6. A01W372

      Disconnect the fuel pump harness connector.

    7. A01W1BEE20
      Text in Illustration
      *1 O-ring
      *2 Fuel Pump Spacer
      *a 5.0 mm (0.197 in.)

      Remove the O-ring and fuel pump spacer from the fuel pump with filter assembly.

      Note

      Be careful not to damage the sealing surface.

      Tech Tips

      If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm diameter) that is formed as shown in the illustration.

  4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A01W1ZV

      Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

      Note

      Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and the fuel filter.

    2. A01W580E17
      Text in Illustration
      *1 O-ring

      Remove the 2 O-rings from the fuel pressure regulator assembly.