FUEL PUMP(for High Pressure) INSPECTION

PROCEDURE


  1. INSPECT FUEL PUMP WITH SEAL SUB-ASSEMBLY


    1. A01W5JJE02
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Pump with Seal Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 0.5 Ω

      If the result is not as specified, replace the fuel pump with seal sub-assembly.