FUEL SENDER GAUGE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01W2V6E03
      Text in Illustration
      *1 Tube
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disconnect the wire harness clamp as shown in the illustration.

      Note

      Do not damage the tube and wire harness.

    2. Disconnect the wire harness clamp.

      Note

      Do not damage the wire harness.

    3. A01VZTW

      Remove the 2 wire harness protectors from the wire harness.

      Note

      Do not damage the wire harness.

    4. A01W3TF

      Disconnect the connector of the fuel sender gauge assembly.

    5. A01W28C

      Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.