FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT

    Click here

  6. REMOVE CRANKSHAFT PULLEY


    1. A01W03IE09
      Text in Illustration
      *a Hold
      B001O8N Turn

      Using SST, loosen the crankshaft pulley bolt.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01VZDPE03
      Text in Illustration
      *a Hold
      B001O8N Turn

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )
    3. A01W2O6

      Remove the pulley set key from the crankshaft.

  7. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01W0RRE09
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the timing chain case oil seal lip.

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.