ENGINE UNIT COMPONENTS
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
| *1 | CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY | *2 | CAMSHAFT TIMING GEAR ASSEMBLY |
| *3 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY | *4 | CHAIN SUB-ASSEMBLY |
| *5 | CHAIN TENSIONER SLIPPER | *6 | CRANKSHAFT POSITION SENSOR |
| *7 | CRANKSHAFT PULLEY | *8 | CRANKSHAFT TIMING SPROCKET |
| *9 | ENGINE MOUNTING BRACKET RH | *10 | NO. 1 CHAIN TENSIONER ASSEMBLY |
| *11 | NO. 1 CHAIN VIBRATION DAMPER | *12 | TIMING CHAIN COVER OIL SEAL |
| *13 | TIMING CHAIN COVER PLATE | *14 | TIMING CHAIN COVER SUB-ASSEMBLY |
| *15 | TIMING CHAIN GUIDE | *16 | OIL PUMP GASKET |
| *17 | OIL HOLE COVER GASKET | *18 | GASKET |
| *19 | CAMSHAFT TIMING GEAR BOLT | *20 | O-RING |
| *21 | CRANKSHAFT PULLEY SET BOLT | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
MP grease |  |
Adhesive 1324 |
| ★ | Precoated part | - | - |
| *T1 | Type A: 120 N*m (1224 kgf*cm, 89 ft.*lbf) Type B: 95 N*m (969 kgf*cm, 70 ft.*lbf) |
- | - |
ILLUSTRATION
ILLUSTRATION
