FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. A01W1YAE02
      Text in Illustration
      *a Standard Depth (from edge of the timing chain cover assembly)

      Using SST and a hammer, tap in the timing chain cover oil seal.

      SST
      09636-20010
      Standard Depth
      -0.75 to -1.45 mm (-0.0295 to -0.0571 in.)

      Note


      • Keep the lip free from foreign matter.

      • Do not tap in the timing chain cover oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY


    1. Align the crankshaft pulley key with the key groove of the crankshaft pulley.

    2. A01W0VFE04
      Text in Illustration
      *a Hold
      *b Turn
      *c Washers

      Using SST, hold the crankshaft pulley and install the crankshaft pulley set bolt.

      SST
      09213-54015   ( 09214-00030 )
      09213-70011
      09330-00021
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

      Tech Tips

      Insert a few washers (total thickness: approximately 5.0 mm (0.197 in.)) between SST (09213-70011) and SST (09214-00030).

  3. INSTALL V-RIBBED BELT

    Click here